shift algorithms

In order to find shift several methods are available (img_reg_method key):

None: in this case only the motors position / volume position will be used and the pixel size
skimage: use sci-kit image 'phase_cross_correlation' function with a specific space (real or fourier)
nabu-fft: use nabu find_shift_correlate function

Settings of the shift search can be done with the axis_X_params keyword from the configuration file. Synthax is like key1=value1,key2=value2. For now valid keys are: And some parameter can also be specified like to set the window search size with 'window_size'.

first example: ask shift search over the axis 0 (aka z) with nabu-fft on a window of 400 px around the expected overlap.
```
axis_0_params = overlap_size=;img_reg_method=nabu-fft;window_size=400
```
second example: ask the shifting algorithm to take the raw value of volume or scan for axis 2 (aka x)
```
axis_2_params = img_reg_method=None;
```

Finally here is the list of the different keywork the axis_x_params can contain:

img_reg_method: details upper
overlap_size: size to apply stitching. If not provided will take the largest size possible'.
low_pass: low pass filter value for filtering frames before shift research
high_pass: high pass filter value for filtering frames before shift research