.. _Installation: Installation ============ *silx* supports most operating systems and different versions of the Python programming language. This table summarizes the support matrix of silx: +------------+--------------+--------------------------------+ | System | Python vers. | Qt and its bindings | +------------+--------------+--------------------------------+ | `Windows`_ | 3.7-3.10 | PyQt5.9+, PySide6.4+, PyQt6.3+ | +------------+--------------+--------------------------------+ | `MacOS`_ | 3.7-3.10 | PyQt5.9+, PySide6.4+, PyQt6.3+ | +------------+--------------+--------------------------------+ | `Linux`_ | 3.7-3.10 | PyQt5.9+, PySide6.4+, PyQt6.3+ | +------------+--------------+--------------------------------+ For the description of *silx* dependencies, see the Dependencies_ section. For all platforms, you can install *silx* with pip, see `Installing with pip`_. To install *silx* in a `Virtual Environment`_, there is short version here-after and a longer description: :ref:`silx-venv`. You can also install *silx* from the source, see `Installing from source`_. Installing with pip ------------------- To install silx (and all its dependencies_), run: .. code-block:: bash pip install silx[full] To install silx with a minimal set of dependencies, run: .. code-block:: bash pip install silx .. note:: Use pip's ``--user`` option to install locally for the current user. .. note:: - If numpy is not yet installed, you might need to install it first. - Replace the ``pip`` command with ``pip3`` to install *silx* or any other library for Python 3. Dependencies ------------ .. _dependencies: The mandatory dependencies are: - `numpy `_ - `h5py `_ - `fabio `_ The GUI widgets depend on the following extra packages: * A Qt binding: either `PyQt5 `_, `PySide6 `_ or `PyQt6 `_ * `matplotlib `_ * `PyOpenGL `_ * `qt_console `_ for the ``silx.gui.console`` widget. * `dateutil `_ *silx.opencl* further depends on OpenCL and the following packages too : * `pyopencl `_ * `Mako `_ The complete list of dependencies with the minimal version is described in the `requirement.txt `_ at the top level of the source package. Build dependencies ++++++++++++++++++ In addition to run-time dependencies, building *silx* requires a C/C++ compiler, `numpy `_ and `cython `_. The complete list of dependencies for building the package, including its documentation, is described in the `requirement-dev.txt `_ at the top level of the source package. Linux ----- Packages are available for a few distributions: - Debian/Ubuntu: see `Installing a Debian package`_. - `CentOS 7 RPM packages `_ provided by the Max IV institute at Lund, Sweden. - `Fedora 23 rpm packages `_ provided by the Max IV institute at Lund, Sweden. - `Arch Linux (AUR) package `_ provided by Leonid Bloch. You can also follow one of those installation procedures: - `Installing with pip`_ - Installing in a `Virtual Environment`_ - `Installing from source`_ Installing a Debian package +++++++++++++++++++++++++++ silx is officially packaged in `Debian `_ and `Ubuntu `_. To install it, run `apt-get install silx` as root. The `python3-silx` package provides the library, while the `silx` package provides the executable (`silx view`, `silx convert`, ...). Unofficial (possibly more recent) packages are available for Debian 10 (Buster, amd64) and Ubuntu 20.04 (Focal, amd64 and ppc64le) in this repository: http://www.silx.org/pub/linux-repo/. See information on `how-to use this repository `_ before running `apt-get install silx`. .. note:: Those packages are built automatically, hence not signed. You have to accept the installation of non-signed packages. If the packages are not installed, it might be due to the priority list. You can display the priority list using `apt-cache policy silx`. If the Pin-number of silx.org is too low compared to other sources, see the "Information/Troubleshooting" section `here `_, and start the update/install procedure again. Windows ------- The simplest way of installing *silx* on Windows is to install it with ``pip``, see `Installing with pip`_:: pip install silx[full] This assumes you have Python and pip installed and configured. If you don't, read the following sections. Alternatively, you can check: - Installing in a `Virtual Environment`_ - `Installing from source`_ Installing Python +++++++++++++++++ Download and install Python from `python.org `_. We recommend that you install the 64bit version of Python, which is not the default version suggested on the Python website. The 32bit version has limited memory, and also we don't provide a binary wheel for it. This means that you would have to install *silx* from its sources, which requires you to install a C compiler first. Configure Python as explained on `docs.python.org `_ to add the python installation directory to your PATH environment variable. Alternative Scientific Python stacks exists such as `WinPython `_ or `Anaconda `_. They all offer most of the scientific packages already installed which makes the installation of dependencies much easier. Using pip +++++++++ Configure your PATH environment variable to include the pip installation directory, the same way as described for Python. The pip installation directory will likely be ``C:\Python35\Scripts\``. Then you will be able to use all the pip commands listed below in a command prompt. MacOS ----- Make sure to use python3 to install silx (you might need to install python3). Then, install *silx* with ``pip``, see `Installing with pip`_:: pip install silx[full] This should work without issues, as binary wheels of *silx* are provided on PyPi. Virtual Environment ------------------- Virtual environments are self-contained directory trees that contain a Python installation for a particular version of Python, plus a number of additional packages. They do not require administrator privileges, nor *root* access. To create a virtual environment, decide upon a directory where you want to place it (for example *myenv*), and run the *venv* module as a script with the directory path: .. code-block:: bash python3 -m venv myenv This will create the *myenv* directory if it doesn’t exist, and also create directories inside it containing a copy of the Python interpreter, the standard library, and various supporting files. Once you’ve created a virtual environment, you may activate it. On Windows, run: .. code-block:: bash myenv\\Scripts\\activate.bat On Unix or MacOS, run: .. code-block:: bash source myenv/bin/activate You can install, upgrade, and remove packages using a program called *pip* within your virtual environment (see `Installing with pip`_). .. code-block:: bash pip install silx[full] Installing from source ---------------------- Building *silx* from the source requires some `Build dependencies`_ which may be installed using: .. code-block:: bash pip install -r https://github.com/silx-kit/silx/raw/master/requirements-dev.txt Building from source ++++++++++++++++++++ Source package of *silx* releases can be downloaded from `the pypi project page `_. After downloading the `silx-x.y.z.tar.gz` archive, extract its content:: tar xzvf silx-x.y.z.tar.gz Alternatively, you can get the latest source code from the master branch of the `git repository `_: https://github.com/silx-kit/silx You can now build and install *silx* from its sources: .. code-block:: bash cd silx-x.y.z pip uninstall -y silx pip install . [--user] Known issues ............ There are specific issues related to MacOSX. If you get this error:: UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 1335: ordinal not in range(128) This is related to the two environment variables LC_ALL and LANG not being defined (or wrongly defined to UTF-8). To set the environment variables, type on the command line: .. code-block:: bash export LC_ALL=en_US.UTF-8 export LANG=en_US.UTF-8 Advanced build options ++++++++++++++++++++++ Advanced options can be set through the following environment variables: .. list-table:: :widths: 1 4 :header-rows: 1 * - Environment variable - Description * - ``SILX_WITH_OPENMP`` - Whether or not to compile Cython code with OpenMP support (default: ``True`` except on macOS where it is ``False``) * - ``SILX_FORCE_CYTHON`` - Whether or not to force re-generating the C/C++ source code from Cython files (default: ``False``). * - ``SPECFILE_USE_GNU_SOURCE`` - Whether or not to use a cleaner locale independent implementation of :mod:`silx.io.specfile` by using `_GNU_SOURCE=1` (default: ``False``; POSIX operating system only). * - ``SILX_FULL_INSTALL_REQUIRES`` - Set it to put all dependencies as ``install_requires`` (For packaging purpose). * - ``SILX_INSTALL_REQUIRES_STRIP`` - Comma-separated list of package names to remove from ``install_requires`` (For packaging purpose). .. note:: Boolean options are passed as ``True`` or ``False``. Package the build into a wheel and install it (this requires to install the `build `_ package): .. code-block:: bash python -m build --wheel pip install dist/silx*.whl To build the documentation, using `Sphinx `_: .. code-block:: bash pip install . # Make sure to install the same version as the source sphinx-build doc/source/ build/html .. note:: To re-generate the example script screenshots, build the documentation with the environment variable ``DIRECTIVE_SNAPSHOT_QT`` set to ``True``. Formatting ++++++++++ To format the code, use `black `_. Testing +++++++ To run the tests of an installed version of *silx*, run the following on the python interpreter: .. code-block:: python import silx.test silx.test.run_tests() To run the test suite of a development version, use the *run_tests.py* script at the root of the source project. .. code-block:: bash python ./run_tests.py