Test coverage report for pyFAI¶
Measured on pyFAI version 0.21.0, 20/01/2022
| Name | Stmts | Exec | Cover |
|---|---|---|---|
| __init__.py | 44 | 27 | 61.4 % |
| _version.py | 54 | 51 | 94.4 % |
| average.py | 495 | 356 | 71.9 % |
| azimuthalIntegrator.py | 1757 | 1131 | 64.4 % |
| blob_detection.py | 506 | 191 | 37.7 % |
| calibrant.py | 431 | 340 | 78.9 % |
| containers.py | 351 | 317 | 90.3 % |
| control_points.py | 350 | 123 | 35.1 % |
| diffmap.py | 370 | 59 | 15.9 % |
| directories.py | 21 | 16 | 76.2 % |
| distortion.py | 605 | 387 | 64.0 % |
| geometry.py | 1210 | 969 | 80.1 % |
| geometryRefinement.py | 535 | 257 | 48.0 % |
| goniometer.py | 560 | 332 | 59.3 % |
| grid.py | 36 | 15 | 41.7 % |
| load_integrators.py | 140 | 101 | 72.1 % |
| massif.py | 230 | 188 | 81.7 % |
| method_registry.py | 244 | 213 | 87.3 % |
| multi_geometry.py | 144 | 117 | 81.2 % |
| parallax.py | 249 | 211 | 84.7 % |
| spline.py | 427 | 252 | 59.0 % |
| units.py | 109 | 102 | 93.6 % |
| worker.py | 458 | 284 | 62.0 % |
| app/__init__.py | 7 | 7 | 100.0 % |
| app/average.py | 176 | 35 | 19.9 % |
| app/benchmark.py | 58 | 21 | 36.2 % |
| app/calib.py | 31 | 21 | 67.7 % |
| app/calib2.py | 342 | 37 | 10.8 % |
| app/check_calib.py | 32 | 21 | 65.6 % |
| app/detector2nexus.py | 88 | 20 | 22.7 % |
| app/diff_map.py | 37 | 17 | 45.9 % |
| app/diff_tomo.py | 109 | 25 | 22.9 % |
| app/drawmask.py | 106 | 31 | 29.2 % |
| app/eiger_mask.py | 58 | 23 | 39.7 % |
| app/integrate.py | 510 | 385 | 75.5 % |
| app/mx_calibrate.py | 31 | 20 | 64.5 % |
| app/peakfinder.py | 185 | 37 | 20.0 % |
| app/recalib.py | 32 | 20 | 62.5 % |
| app/saxs.py | 89 | 26 | 29.2 % |
| app/sparsify.py | 177 | 37 | 20.9 % |
| app/waxs.py | 101 | 27 | 26.7 % |
| benchmark/__init__.py | 569 | 82 | 14.4 % |
| detectors/__init__.py | 22 | 22 | 100.0 % |
| detectors/_adsc.py | 77 | 77 | 100.0 % |
| detectors/_common.py | 721 | 490 | 68.0 % |
| detectors/_dectris.py | 345 | 233 | 67.5 % |
| detectors/_esrf.py | 96 | 80 | 83.3 % |
| detectors/_imxpad.py | 392 | 252 | 64.3 % |
| detectors/_non_flat.py | 155 | 128 | 82.6 % |
| detectors/_others.py | 133 | 120 | 90.2 % |
| detectors/_psi.py | 155 | 83 | 53.5 % |
| detectors/_rayonix.py | 260 | 225 | 86.5 % |
| engines/CSR_engine.py | 182 | 176 | 96.7 % |
| engines/__init__.py | 19 | 19 | 100.0 % |
| engines/histogram_engine.py | 79 | 75 | 94.9 % |
| engines/preproc.py | 103 | 74 | 71.8 % |
| ext/__init__.py | 3 | 3 | 100.0 % |
| gui/ApplicationContext.py | 107 | 50 | 46.7 % |
| gui/CalibrationContext.py | 217 | 128 | 59.0 % |
| gui/CalibrationWindow.py | 192 | 169 | 88.0 % |
| gui/IntegrationDialog.py | 205 | 54 | 26.3 % |
| gui/__init__.py | 4 | 4 | 100.0 % |
| gui/cli_calibration.py | 1526 | 100 | 6.6 % |
| gui/diffmap_widget.py | 352 | 62 | 17.6 % |
| gui/matplotlib.py | 33 | 26 | 78.8 % |
| gui/mpl_calib.py | 224 | 40 | 17.9 % |
| gui/mpl_calib_qt.py | 49 | 21 | 42.9 % |
| gui/peak_picker.py | 286 | 94 | 32.9 % |
| gui/dialog/Detector3dDialog.py | 173 | 36 | 20.8 % |
| gui/dialog/DetectorSelectorDialog.py | 432 | 318 | 73.6 % |
| gui/dialog/GeometryDialog.py | 232 | 25 | 10.8 % |
| gui/dialog/IntegrationMethodDialog.py | 216 | 36 | 16.7 % |
| gui/dialog/MessageBox.py | 27 | 8 | 29.6 % |
| gui/dialog/OpenClDeviceDialog.py | 116 | 14 | 12.1 % |
| gui/dialog/__init__.py | 4 | 4 | 100.0 % |
| gui/helper/MarkerManager.py | 209 | 65 | 31.1 % |
| gui/helper/ProcessingWidget.py | 19 | 6 | 31.6 % |
| gui/helper/RingCalibration.py | 306 | 47 | 15.4 % |
| gui/helper/RingExtractor.py | 238 | 35 | 14.7 % |
| gui/helper/SynchronizeMaskToolColor.py | 27 | 27 | 100.0 % |
| gui/helper/SynchronizePlotBackground.py | 27 | 27 | 100.0 % |
| gui/helper/SynchronizeRawView.py | 56 | 46 | 82.1 % |
| gui/helper/__init__.py | 4 | 4 | 100.0 % |
| gui/helper/model_transform.py | 113 | 16 | 14.2 % |
| gui/jupyter/__init__.py | 1 | 1 | 100.0 % |
| gui/jupyter/_plot.py | 85 | 14 | 16.5 % |
| gui/jupyter/calib.py | 71 | 22 | 31.0 % |
| gui/model/AbstractModel.py | 35 | 30 | 85.7 % |
| gui/model/CalibrantModel.py | 15 | 14 | 93.3 % |
| gui/model/CalibrationModel.py | 44 | 42 | 95.5 % |
| gui/model/ConstraintModel.py | 60 | 21 | 35.0 % |
| gui/model/DataModel.py | 15 | 14 | 93.3 % |
| gui/model/DataModelAdaptor.py | 27 | 12 | 44.4 % |
| gui/model/DetectorModel.py | 15 | 14 | 93.3 % |
| gui/model/ExperimentSettingsModel.py | 80 | 74 | 92.5 % |
| gui/model/FilenameModel.py | 21 | 14 | 66.7 % |
| gui/model/Fit2dGeometryModel.py | 64 | 16 | 25.0 % |
| gui/model/GeometryConstraintsModel.py | 86 | 41 | 47.7 % |
| gui/model/GeometryHistoryModel.py | 40 | 14 | 35.0 % |
| gui/model/GeometryModel.py | 85 | 40 | 47.1 % |
| gui/model/ImageModel.py | 72 | 40 | 55.6 % |
| gui/model/IntegrationSettingsModel.py | 26 | 23 | 88.5 % |
| gui/model/ListModel.py | 122 | 88 | 72.1 % |
| gui/model/MarkerModel.py | 42 | 33 | 78.6 % |
| gui/model/MaskedImageModel.py | 31 | 26 | 83.9 % |
| gui/model/PeakModel.py | 88 | 58 | 65.9 % |
| gui/model/PeakSelectionModel.py | 83 | 32 | 38.6 % |
| gui/model/PlotViewModel.py | 64 | 62 | 96.9 % |
| gui/model/__init__.py | 4 | 4 | 100.0 % |
| gui/tasks/AbstractCalibrationTask.py | 66 | 57 | 86.4 % |
| gui/tasks/ExperimentTask.py | 316 | 229 | 72.5 % |
| gui/tasks/GeometryTask.py | 796 | 371 | 46.6 % |
| gui/tasks/IntegrationTask.py | 769 | 297 | 38.6 % |
| gui/tasks/MaskTask.py | 219 | 141 | 64.4 % |
| gui/tasks/PeakPickingTask.py | 1349 | 578 | 42.8 % |
| gui/tasks/__init__.py | 4 | 4 | 100.0 % |
| gui/utils/FilterBuilder.py | 43 | 13 | 30.2 % |
| gui/utils/ProxyAction.py | 66 | 21 | 31.8 % |
| gui/utils/__init__.py | 34 | 14 | 41.2 % |
| gui/utils/colorutils.py | 46 | 6 | 13.0 % |
| gui/utils/eventutils.py | 71 | 39 | 54.9 % |
| gui/utils/imageutils.py | 26 | 14 | 53.8 % |
| gui/utils/projecturl.py | 20 | 19 | 95.0 % |
| gui/utils/timeutils.py | 12 | 10 | 83.3 % |
| gui/utils/tree.py | 118 | 25 | 21.2 % |
| gui/utils/units.py | 76 | 66 | 86.8 % |
| gui/utils/unitutils.py | 56 | 8 | 14.3 % |
| gui/utils/validators.py | 89 | 83 | 93.3 % |
| gui/widgets/AdvancedComboBox.py | 66 | 56 | 84.8 % |
| gui/widgets/AdvancedSpinBox.py | 20 | 11 | 55.0 % |
| gui/widgets/CalibrantPreview.py | 108 | 100 | 92.6 % |
| gui/widgets/CalibrantSelector.py | 91 | 67 | 73.6 % |
| gui/widgets/ChoiceToolButton.py | 71 | 43 | 60.6 % |
| gui/widgets/ColoredCheckBox.py | 28 | 11 | 39.3 % |
| gui/widgets/DetectorLabel.py | 118 | 70 | 59.3 % |
| gui/widgets/DetectorModel.py | 86 | 82 | 95.3 % |
| gui/widgets/DetectorSelector.py | 55 | 15 | 27.3 % |
| gui/widgets/ElidedLabel.py | 64 | 51 | 79.7 % |
| gui/widgets/FileEdit.py | 155 | 58 | 37.4 % |
| gui/widgets/FitParamView.py | 309 | 127 | 41.1 % |
| gui/widgets/GeometryHistoryComboBox.py | 113 | 60 | 53.1 % |
| gui/widgets/GeometryLabel.py | 37 | 30 | 81.1 % |
| gui/widgets/LoadImageToolButton.py | 117 | 50 | 42.7 % |
| gui/widgets/MethodLabel.py | 93 | 49 | 52.7 % |
| gui/widgets/MonitorNameEdit.py | 20 | 10 | 50.0 % |
| gui/widgets/OpenClDeviceLabel.py | 52 | 22 | 42.3 % |
| gui/widgets/QuantityEdit.py | 142 | 89 | 62.7 % |
| gui/widgets/QuantityLabel.py | 132 | 80 | 60.6 % |
| gui/widgets/UnitLabel.py | 69 | 35 | 50.7 % |
| gui/widgets/UnitSelector.py | 84 | 81 | 96.4 % |
| gui/widgets/WorkerConfigurator.py | 458 | 302 | 65.9 % |
| gui/widgets/__init__.py | 4 | 4 | 100.0 % |
| io/__init__.py | 526 | 320 | 60.8 % |
| io/image.py | 24 | 20 | 83.3 % |
| io/integration_config.py | 138 | 124 | 89.9 % |
| io/nexus.py | 197 | 138 | 70.1 % |
| io/ponifile.py | 156 | 149 | 95.5 % |
| io/sparse_frame.py | 107 | 20 | 18.7 % |
| io/spots.py | 80 | 21 | 26.2 % |
| opencl/OCLFullSplit.py | 199 | 24 | 12.1 % |
| opencl/__init__.py | 30 | 24 | 80.0 % |
| opencl/azim_csr.py | 514 | 376 | 73.2 % |
| opencl/azim_hist.py | 458 | 320 | 69.9 % |
| opencl/azim_lut.py | 323 | 235 | 72.8 % |
| opencl/ocl_hist_pixelsplit.py | 223 | 27 | 12.1 % |
| opencl/peak_finder.py | 538 | 402 | 74.7 % |
| opencl/preproc.py | 204 | 146 | 71.6 % |
| opencl/sort.py | 291 | 224 | 77.0 % |
| resources/__init__.py | 31 | 20 | 64.5 % |
| utils/__init__.py | 129 | 77 | 59.7 % |
| utils/bayes.py | 100 | 67 | 67.0 % |
| utils/callback.py | 14 | 11 | 78.6 % |
| utils/decorators.py | 72 | 70 | 97.2 % |
| utils/ellipse.py | 74 | 71 | 95.9 % |
| utils/grid.py | 87 | 64 | 73.6 % |
| utils/header_utils.py | 74 | 59 | 79.7 % |
| utils/logging_utils.py | 43 | 41 | 95.3 % |
| utils/mathutil.py | 398 | 278 | 69.8 % |
| utils/orderedset.py | 54 | 13 | 24.1 % |
| utils/shell.py | 55 | 46 | 83.6 % |
| utils/stringutil.py | 73 | 62 | 84.9 % |
| pyFAI total | 33356 | 18146 | 54.4 % |